UV High Intensity Lamps

UVP High Intensity UV Lamps

• Lamps come with heat-resistant plastic (Cool-Touch) housing allowing users to handle the lamp head regardless of how long the lamp has been operating
• A 100 watt spot bulb is standard with all models (except the B-100SP); the bulb is rated at 5000 hours
• The lamp head connects to the transformer base for hands free use allowing the lamp head to rotate a full 360°; remove the lamp from the base for additional mobility

Models of High Intensity UV Lamps

B-100AP and B-100AP/R
B-100AP models feature 100 watt longwave UV, Cool-Touch housing and ballast base. At 457 mm, the lamp produces a highly intense center of UV irradiance about 127 mm in diameter. Lamp head can rotate 360 degrees when attached to the base for hands-free operation or lamp can be removed from the base. 8 ft primary and secondary cords. For added mobility, select the B-100AP/R which includes 6.1m primary and secondary cords.

Applications:
Uses for these lamps include non-destructive testing and fluorescence inspection.

B-100YP
These model features a yellow filter which blocks wavelengths shorter than 500 nm and produces three strong mercury lines at 543, 574 and 576 nm. The high contrast light is produced for fine surface particle detection. Particles down to 10 microns are routinely visible with this lamp. The B-100YP is built with a plastic housing.

Applications:
These lamps are excellent for semiconductor wafer inspection as most photoresist absorption occurs below 450 nm.

Caution UV!

Ultraviolet lamps are powerful sources of UV radiation that will cause damage to unprotected eyes and skin. Before operating any unit, be sure all personnel in the area are properly protected. Personnel should protect skin and eyes by wearing ultraviolet protection eyewear, gloves and clothing when operating the UV equipment.