UV Incubator
UV incubator is a benchtop device for incubation and UV sterilization.
The unit offers precise temperature control and high temperature uniformity.
Suitable for incubation of biological assays, fungal or bacterial cultures, eggs and other samples up to 68°C.
Request a quoteUV Incubator for Incubation and UV Sterilization
- Minimal space required on the work table
- Heating element and fan create constant temperatures inside the chamber
- Temperature range: RT +3°C to 68°C maximum; Accuracy ±0.5°C
- Temperature uniformity: +0.5°C at 37°C
- Reliable sterilization by short-wave UV light (254 nm)
- The clear polycarbonate door allows easy observation of samples and UV protection
- Two air-permeable shelves are included. These can be removed and up to a maximum of 150 x 10 cm agar plates can be incubated
- Easy-to-clean stainless steel interior
- Housing made of robust, powder-coated aluminum
To sterilize the incubation chamber between experiments, the instrument is equipped with UV tubes that emit short-wave (254 nm) UV light.
By applying the germicidal properties of UV light, viable fungi, bacteria and yeasts can be killed and cross-contamination between experiments avoided.
To protect users, the incubator door blocks UV light and does not allow radiation to pass through. The germicidal UV lamp is automatically switched off as soon as the door is opened.
Therefore, there is no risk of damage to unprotected skin areas or the eyes from the intense UV radiation. For safety, the UV incubator provides an automatic decontamination protocol using high-intensity, short-wavelength UV light.
In addition, the interior of the unit is made of stainless steel and can be easily cleaned with non-aggressive, mild detergents.
The instrument is equipped with two stainless steel trays that can be inserted in three different positions. This flexible adjustment allows the simultaneous incubation of samples of different sizes.
Order No. UV Incubator | 110.4320 |
Temperature Range | RT +3°C to +68°C |
Sensor | LM345 Integrated Temperature Sensor |
Controller | PI |
Setpoint | Digital |
Display | Digital LED |
Temperature Accuracy | +1°C |
Temperature Uniformity | +0,5°C to 37°C |
Relative Humidity (Interior) | ~ 80% |
Unit Heat Load | |
Typical Operation | Incubation |
Heating Element | 1.250 Watt |
Dimensions | |
Exterior (W x H x D) | 44.5 x 43.2 x 35.6 cm |
Interior (W x H x D) | 35.6 x 27.2 x 27.7 cm |
Shelves | |
Dimensions (W x D) | 33.8 x 21.6 cm |
Construction | Formed stainless steel |
Surface | 729,35 cm2 |
Construction | |
Volume Interior | 26.9 liters |
Material Interior | Stainless steel |
Exterior cladding | Aluminium, powder coated |
Door | Acrylic |
Weight | 21.3 kg |
Voltage | 230 V, 60 Hz |
Power Consumption | 1.250 Watt |
Working conditions | 5°C to 40°C, max. 2.000 m NN |