8er Strip Tubes 0.2 ml, Separate Domed Caps

Uniform thin wall design for optimum heat transfer. Compatible with standard 96 well blocks. DNase, RNase and pyrogen free. Autoclavable.

Tubes: 0,2 ml, 8 Strip Tubes
Caps: domed, 8 Strip

The caps are not attached to the tubes. Tubes and caps can be ordered separately (see description).

Available pre-sterile, assorted colors, pre-sterile assorted colors or clear non-sterile.

Please find the exact article number in the description.

Request a quote

 0,2 ml PCR Tubes, 8 strip

DescriptionTypePackagingPackaging
Breakdown
3426.8.XNP, clearBulk
only tubes 
5 bags of 25 tbs/pack
10 packs/case  
3426.8A.XNP, assorted colors*Bulk
only tubes 
5 bags of 25 tbs/pack
10 packs/case
3426.8S.XNP, clear, pre-sterileBulk
only tubes 
5 bags of 25 tbs/pack
10 packs/case
3426.8AS.XNP, assorted colors*, pre-sterileBulk
only tubes 
5 bags of 25 tbs/pack
10 packs/case

* Content of assorted colors: Blue, green, lavender, red, yellow

 

Separate strip caps (domed), 8 strip

DescriptionTypePackagingPackaging
Breakdown
3427.8.XNP, clearBulk
only tubes 
125 strip caps/pack
10 packs/case
3427.8A.XNP, assorted colors*Bulk
only tubes 
125 strip caps/pack
10 packs/case
3427.8S.XNP, clear, pre-sterileBulk
only tubes 
125 strip caps/pack
10 packs/case
3427.8AS.XNP, assorted colors*, pre-sterileBulk
only tubes 
125 strip caps/pack
10 packs/case

* Content of assorted colors: Blue, green, lavender, red, yellow

Tubes & caps in one pack

DescriptionTypePackagingPackaging
Breakdown
3459.8.XNP, clearBulk
tubes & caps
5 bags of 25/pack
10 packs/case
Description8 strip PCR tubes for 0.2 ml with separate domed cap
MaterialVirgin Polypropylene
CompatibilityCompatible with most Thermal Cycler products on the market
Packaging Breakdown125 strips per pack/10 packs per case
AutoclavableAutoclavable at 121°C for 15 minutes at 15 PSI
Storage ConditionsStore in a clean, dry environment at room temperature 15-30°C
Production Standards
and Processes
Product is assembled under a rigorous quality control system in a RNase/DNase free white room in accordance with ISO 9001:2000 standards. Biotix personnel are capped, masked, gloved and gowned in the assembly area. RNase/DNase free certification is verified for every lot as required.
RNase/DNaseProducts are washed in distilled water and concentrated via centrifugation.
Samples are added to previously established nucleic acid standards, incubated for one hour at 37°C, and tested on a 2% gel using electrophoresis. Products must show no degradation of standards to pass. Test sensitivity is 10-7 Kunitz units/μl.
Endotoxin/PyrogenProducts are tested for endotoxins by using the Limulus Amebocyte Lysate (LAL) gel assay according to FDA guidelines. Test sensitivity is 0.06 EU/ml.
NukleinsäureProducts are washed in distilled water and concentrated via centrifugation.
Then, samples are added to protocol specified PCR reactions and thermal cycled for 50 cycles. A 2% agarose gel electrophoresis is used to examine experimental samples, positive controls, and negative controls. To pass, product samples must show no DNA amplification.
SterilizationProducts are sterilized using electron beam irradiation.