Power Supplies for Pen-RayLamps
Original made specifically for the Pen-Ray Lamps, these power supplies provide proper voltage and current for starting and operating Pen-Ray lamps.
*Please refer to the technical data for the exact part number and more details.
Request a quote
Pen-Ray Power Supplies
Specifications
- Pen-Ray Lamps operate on an AC current.
- Pen-Ray Lamps can operate satisfactorily at frequencies from 50 Hz to 3k kHz.
- Mating recommendations are available to provide optimum energy output from, and maximum life span of the Pen-Ray Lamps.
- For indoor use only: room temperature 5°C to 40°C
- Maximum relative humidity 80% at temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C
- Fluctuations in the mains voltage must not exceed +10% of the nominal voltage
Open Power Supply
PS-5, PS-6 and PS-10 DC power supplies are designed as open power supplies with no housing. They are designed for placement in other units. The power supplies feature a standard lamp current shown in the chart below. To order a different current, contact UVP's offices. The power supplies can be ordered with a setting in the following ranges: PS-5 15-28mA, PS-6 and PS-10 15-48mA.
| Models* Part Nol | Voltage | Lamp Current (mA / AC) | Dimensions (L x W x H) |
|---|---|---|---|
| AC Input Power Supplies | |||
| PS-1 110.6520 (99-0055-02) | 230 V / 50 Hz | 18 mA / AC | 160 x 94 x 53 mm |
| PS-2 110.6521 (99-0056-02) | 230 V / 50 Hz | 6 mA / AC | 160 x 94 x 53 mm |
| PS-3 110.6524 (99-0057-02) | 230 V / 50 Hz | 10 mA / AC | 160 x 94 x 53 mm |
| PS-4 110.6522 (99-0004-02) | 230 V / 50 Hz | 26 mA / AC | 117 x 147 x 97 mm |
| PS-9 110.6523 (99-0033-02) | 230 V / 50 Hz | 48 mA / AC | 117 x 147 x 97 mm |
*All the power supplies are RoHS compliant. PS-8 is a high-voltage transformer only and its housing can be provided at customer request. The DC input power supplies feature high-frequency operation and standard lamp currents as designated above. To order a power supply with a different output current, contact UVP's offices. The current setting is available in the range of 5-48mA for the DC power supplies.
Add-ons
Pen-Ray Rare Gas Lamps
Pen-Ray Lamps
Mercury Lamps Pen-Ray
Pen-Ray Lamps
Photochemical Quartz Lamps Pen-Ray®
Pen-Ray Lamps
