RT Cycler MyGo ESR
The MyGo Pro ESR cyclers are multiplex real-time PCR devices suitable for a wide range of applications including life science research, food speciation testing and virus detection and quantification.
MyGo ESR is the extended version of MyGo Pro and offers advantages in the red channel area.
Consumables for all MyGo models
- 0.1 ml strip tubes, low profile, attached caps
- 0.1 ml strip tubes, low profile, separate caps
- 0.1 ml PCR single tubes, low profile
MyGo ESR - Real-Time PCR Cycler
Powerful Peltier elements and solid silver blocks ensure both speed and very stable thermal uniformity. The result is fast, accurate, quantitative PCR and melting point analysis.
Advanced algorithms combined with an intuitive user interface support a broad range of applications, operating systems and connection options.
MyGo ESR versus MyGo Pro
1. the automatic quantification analysis is up to three times faster
2. quality values are more robust over a wider range of signal-to-noise ratios
3. multiple wells can be included or excluded together in results tables
These top features remain
1. no moving parts for absolute transport safety
2. independence from consumables
3. optical and thermal validation possible through MyGo validation kit: important for all accredited laboratories
Faster Runs
You can now programme faster PCR runs. Previously, hold times were a minimum of 10s, followed by optical capture.
In most cases, hold times can now be a minimum of 3 seconds, including hold times with optical captures for the MyGo Mini.
Hold Time MyGo ESR
Hold time with detection | Hold time without detection |
---|---|
17 s | 3 s |
Optical Data | |
---|---|
No. of channels | 5 (Multiplex) |
Fluorescence Excitation | 610 nm and 450 nm (red/blue LED) |
Fluorescence Detection | 510 nm to 750 nm |
Detector type | CMOS array |
Detection sensitivity | Single copy detection |
Dynamic range | 9-log |
Presicion | 1.1 fold discrimination |
Temperature Control | |
---|---|
Thermal system | Peltier, 99.99% silver block |
Temperature range | 37°C to 99°C |
Speed | 5°C/s Heating 4°C/s Cooling |
Thermal uniformity | ± 0,1 °C |
Thermal accuracy | ± 0,25°C |
Factory calibrated dyes | SYBR Green I, ResoLight, FAM, VIC, HEX, Cy5, ROX, LC Green, SYTO 9, Cy5.5. Instrument Specific Calibration for (FAM, HEX, ROX, CY5, CY5.5) Note: Does not work with TexasRed. |
Multiplex with red dyes | Yes |
Supported assay formats | TaqMan®, Molecular Beacons, SimpleProbes®, Intercalators, High Resolution Melting (HRM) |
General Technical Data | |
---|---|
Order No. MyGo Pro ESR | 112.2015 |
Number of wells | 32 well |
Tube format | 0.1 ml tubes, 8 well strip-tubes |
Reaction volume | 10 – 100 μl |
Run time | <40 min (dependent on assay) |
Status display | Lighting in the lid changes color |
Interface | Desktop PC/laptop required Note: Protocols can be run from a preloaded USB thumb drive. |
Software | Windows/Mac OS X or Linux operating software |
Connectivity | LAN (RJ45), USB |
Dimensions (W x D x H) | 25 x 27 x 23 cm |
Power consumption | 170 W |
Weight | 7 kg |
Electrical Voltage, Frequency | 100 – 240 V AC +/–10%, 50 – 60 Hz +/–10% |
Operation noise | <40 dB |