Refrigerated Centrifuge LMC-4200R

LMC-4200R model provides stable temperature control of the biomaterial during centrifugation.

Very user-friendly with the possibility of setting speed, temperature and time.

LMC-4200R is a modern centrifuge for operation with microplates, gel cards and tubes from 10 to 50 ml.

Request a quote

Bench-top Centrifuge with Refrigeration

Temperature control of the so-called “cold-shelf” is a gold standard for enzymologists and cell biologists because it ensures conditions necessary for reproducibility of the sample preparation stage. Temperature control absence at this stage can cause unpredictable results.

  • Soft start and run-down of the rotor;
  • Efficient rate of chamber refrigeration: under 10 min;
  • Maintenance of stable temperature during operation;
  • User-friendly setting of centrifugation parameters (speed, temperature, time) and simultaneous display of both set and actual values;
  • Safe operation is provided by a metal protection chamber and a case cover, automatic stop at imbalance (emergency shutdown, "IMBALANCE" displayed) and a lock keeping the lid closed while the centrifuge is running;
  • Setting rotor speed in RPM or RCF;
  • Multiple acceleration (Slow, Normal, Fast) and deceleration (0, Slow, Normal, Fast) modes and possibility to switch off forced braking;
  • Low noise level;
  • Wide choice of accessory rotors.

Optional Rotors for LMC-4200R

Rotor R-2
Swing-out rotor for standard 96-well microtitre plates
For skirted PCR plates,
deepwell plates up to 45 mm.
Plate dimensions (W x L): 128 x 85.6 mm
Max. height: up to 45 mm
Capacity: 2
Max. speed: 2000 rpm
Max. RCF: 560 x g
Adapter AP-96 for R-2For 96-well semi-skirted and non-skirted PCR plates, autoclavable
Material: Ertacetal® C
Adapter AP-384 for R-22 Adapter for 384-well plates, autoclavable.
Material: Ertacetal® C
Rotor R-12/10
Swing-out rotor for round bottom centrifuge tube
Tube dimensions (W x L): 16 x 105 mm
Capacity: 12
Tube volume: 10 – 15 ml
Max. speed: 4200 rpm
Max. RCF: 3160 x g
Rotor R-24/10
Swing-out rotor for round bottom centrifuge tube
Tube dimensions (Ø x length):
16 x 105 mm
Capacity: 24
Tube volume: 10 – 15 ml
Max. speed: 4000 rpm
Max. RCF: 2860 x g
Rotor R-12/15
Swing-out rotor for conical bottom centrifuge tube
Tube dimension (Ø x length): 17 x 120 mm
Capacity: 12
Tube volume: 15 ml
Max. speed: 4200 rpm
Max. RCF: 3160 x g
Rotor R-6
Swing-out rotor for plastic tubes with conical bottom and a lid
Tube holder material: Aluminium
Tube dimensions (Ø × length) 29 x 115 mm
Capacity 6
Tube volume 50 ml
Max. speed 4200 rpm
Max. RCF: 3160 rpm
Rotor R-6P
Swing-out rotor for plastic tubes with conical bottom and a lid
Tube  holder material: POM Kocetal
Tube dimensions (Ø × length): 29 x 115 mm
Capacity: 6
Tube volume: 50 ml
Max. speed: 4200 rpm
Max. RCF: 3160 rpm
Rotor R-24GC
Swing-out rotor for gel cards
For blood group serology testing
(Forward Group, Reverse Group, RhD Type and 3 cell antibody screen)
Card dimensions: (L x W) 53 x 74 mm
Capacity: 24
Max. speed: 1500 rpm
Max. RCF: 280 x g
Recommended Centrifugation Time: 9 min
Gel card manufacturers Grifols, DiaMed, etc.

 

Order No.109.3070
CapacityMicrotest plates, gel cards and tubes
from 10 to 50 ml (depending on rotor and vessels)
Temperature control range- 10°C up to + 25°C
Stable temperature maintenance range25°C below ambient ... to + 25°C
Temperature setting resolution1°C
Speed regulation range for centrifuge tubes100 – 4200 rpm (3160 x g)
Speed regulation range for microtitre plates100 – 2000 rpm (560 x g)
Speed setting resolution100 rpm
Rotor imbalance diagnostics (automatic stop, “IMBALANCE” warning)Yes
Timer sound signalYes
Slowdown time, not more30 s
DisplayLCD, 2 lines
Digital time setting1 – 90 min (increment 1 min)
Chamber diameter360 mm
Dimensions635 x 580 x 335 mm
Weight56 kg
Nominal operating voltage230 V, 50 Hz
Power consumption (230 V)990 W (4.3 A)

 

Is it possible to turn off forced breaking?

Yes, this function has been introduced from May 2015. By default, centrifuge applies force to stop the rotor. To toggle between forced braking and free braking, press Open key and hold it for 8 s. Using ▼ and ▲ TIME keys, choose between BRAKE OFF (free braking) and BRAKE ON (forced braking). Press and hold Open key for 8 s to exit.

Similar Products

Centrifuge LMC-3000
Centrifuges
Centrifuge CM-7S
Centrifuges