• English
  • Deutsch

UV Incubator

UV Incubator

The UV Incubator is a benchtop device for incubation and UV sterilization.

The unit offers precise temperature control and high temperature uniformity.

Suitable for incubation of biological assays, fungal or bacterial cultures, eggs and other samples up to 68°C.

+3°C up to 68°C

Unit for Incubation and UV Sterilization


  • Minimal space required on the work table
  • Heating element and fan create constant temperatures inside the chamber
  • Temperature range: RT +3°C to 68°C maximum; Accuracy ±0.5°C
  • Temperature uniformity: +0.5°C at 37°C
  • Reliable sterilization by short-wave UV light (254 nm)
  • The clear polycarbonate door allows easy observation of samples and UV protection
  • Two air-permeable shelves are included. These can be removed and up to a maximum of 150 x 10 cm agar plates can be incubated
  • Easy-to-clean stainless steel interior
  • Housing made of robust, powder-coated aluminum

To sterilize the incubation chamber between experiments, the instrument is equipped with UV tubes that emit short-wave (254 nm) UV light.
By applying the germicidal properties of UV light, viable fungi, bacteria and yeasts can be killed and cross-contamination between experiments avoided.

To protect users, the incubator door blocks UV light and does not allow radiation to pass through. The germicidal UV lamp is automatically switched off as soon as the door is opened.
Therefore, there is no risk of damage to unprotected skin areas or the eyes from the intense UV radiation. For safety, the UV incubator provides an automatic decontamination protocol using high-intensity, short-wavelength UV light.

In addition, the interior of the unit is made of stainless steel and can be easily cleaned with non-aggressive, mild detergents.

The instrument is equipped with two stainless steel trays that can be inserted in three different positions. This flexible adjustment allows the simultaneous incubation of samples of different sizes.

Order No. UV Incubator110.4320
RangeRT +3°C – 68°C
SensorLM345 Integrated Temperature Sensor
DisplayDigital LED
Uniformity±0,5°C bei 37°C
Relative Humidity (Interior)~ 80%
Unit Heat Load
Typical OperationIncubation
Heating Element1.250 Watt
Exterior (W x H x D)44.5 x 43.2 x 35.6 cm
Interior (W x H x D)35.6 x 27.2 x 27.7 cm
Dimensions (W x D)33.8 x 21.6 cm
ConstructionFormed stainless steel
Surface729,35 cm2
Volume Interior26.9 liters
Material InteriorStainless steel
Exterior claddingAluminium, powder coated
Weight21.3 kg
Voltage230 V, 60 Hz
Power1.150 Watt


Please fill in at least the fields with a red asterisk.