Flexible roller mixer for bottles in different sizes. With robust roller drive without up and down.
Depending on the size of the bottles, individual rollers can be removed or moved (except drive roller).
One roller is the drive roller and is fixed. All other rollers are exchangeable.
Please refer to the technical data for the exact article number.
|analog, 1 - 240 rpm|
Part Number: LTF00300
Two rollers are installed in the standard version. Further rollers are available as an option.
The force is transferred from the first to the other rollers by contact with the vessels.
The drive roller should be loaded with the largest and heaviest bottle. The other rollers should be loaded with the same or less load.
Therefore, please make sure that the contact from one roller to the next is not interrupted and that the vessels are in contact.
With the optional Plexiglas enclosure, the bottles or containers are additionally protected.
The unit is completely enclosed in the housing and can be loaded from above.
A socket for the RollerBottle is located inside on the rear wall. When the lid is lifted, the power cuts off automatically.
Of course, the RollerBottle can still be operated independently of the enclosure.
If required, please request the enclosure separately!
|Number of rollers||max. 5|
|max. Load||15 kg|
|Motor rating input (W)||100 W|
|Motor rating output (W)||75 W|
|Speed range||1 - 240 rpm|
|Setting operating time||1 sec - 99 h|
|Dimensions (L x W x H)||880 x 350 x 130 mm|
|Standard equipment||2 rollers|
|Ø Rollers||46 mm|
|Material set-up plate||Steel with PE coated|
|Permissible ambient temperature||5 - 50 °C|
|max. relative humidity||80 %|
|Voltage||230 V / 50/60 Hz|
Models RollerBottle Strong, analog
|Length of Rollers||Part No.|
|2 rollers à 550 mm||105.1012|
|2 rollers à 650 mm||105.1020|
Please fill in at least the fields with a red asterisk.